Brother HL 2270DW - Manual (Page 58)

Control Panel
54
3
LEDs Machine Status
SLEEP
The machine is in Sleep mode (Power Save mode). The machine acts as though it
were turned off. Receiving data or pressing Go wakes up the machine from Sleep
mode to Ready mode.
DEEP SLEEP
The machine is in Deep Sleep mode (reducing more power consumption than Sleep
mode). The machine acts as though it were turned off. If the machine does not
receive data for a certain length of time while it is in Sleep mode, it enters Deep Sleep
mode automatically. Receiving data or pressing Go wakes up the machine from
Deep Sleep mode to Ready mode.
HL-2270DW / HL-2275DW only: If a wireless network is enabled, the machine does
not enter Deep Sleep mode. To disable the wireless network, see chapter 5 of the
Network User's Guide.
READY
The machine is ready to print.
PRINTING
The machine is printing.
WARMING UP
The machine is warming up.
COOLING DOWN
The machine is cooling down. Wait for a few seconds until the inside of the machine
has cooled down.
RECEIVING DATA
The machine is either receiving data from the computer or processing data in the
memory.
DATA REMAINING
There is remaining print data in the machine memory. If the Ready LED is flashing
for a long time and nothing has printed, press Go to print the remaining data in the
memory.