Brother DS-600 - Manual (Page 45)

Mac OS ® X Operation
27
2
m
Insert the black and white calibration sheet with the single arrow on top and the black strip down.
Alternatively, you can use a blank sheet of white paper.
n When the calibration scan is complete, click “OK” and then proceed to scan your documents.
Panther
®
(Mac OS
®
X v10.3)
a
Install the DSmobile 600 scanner driver using the Installation DVD and restart your computer.
b
Connect the scanner to your computer’s USB port.
c Open the “Applications” folder and run “Image Capture”.
d Close the “DSmobile 600” window.
e From the “Image Capture”: menu, choose “Preferences”.
f
Click the “Scanner” tab at the top of the window.
g Click the “Use TWAIN software whenever possible” checkbox.
h Click “OK” and quit “Image Capture” to save changes.
i Re-launch “Image Capture”.
j
In the “DSmobile 600” window, click “Scan”.
k
Click the “Calibrate” button.
l Insert the black and white calibration sheet with the single arrow on top and the black strip down.
Alternatively, you can use a blank sheet of white paper.
m When the calibration scan is complete, click “OK” and then proceed to scan your documents.