Brother MFC-6490CW - Manual (Page 2)

2
2
Load plain Letter/A4
paper
a
Pull paper tray#1 (the upper tray) a
completely out of the machine.
b
Open the paper tray cover a .
c
With both hands, gently press and slide the
paper side guides
a and then the paper length
guide b to fit the paper size.
Make sure that the triangular marks c on the
paper side guides a and paper length guide b
line up with the mark for the paper size you are
using.
d
Fan the stack of paper well to avoid paper jams
and misfeeds.
e
Gently put the paper into paper tray#1 print
side down and top edge first. Check that the
paper is flat in the tray.
f
Gently adjust the paper side guides to the
paper with both hands. Make sure that the
paper side guides touch the edges of the
paper.
Note
• When you use Legal, A3 or Ledger size paper,
press and hold the universal guide release
button
a as you slide out the front of paper
tray#1.
• When you load a different paper size in tray#1
or tray#2, you will need to change the paper
size setting in the machine at the same time.
(See Paper Size and Type in Chapter 3 of the
User’s Guide.)
1
11
1
Important
Do not push the paper in too far.
3
2
1
3