Brother MFC-9420CN - Manual (Page 33)

31
Make sure that you have completed the instructions from Step 1 “Setting Up
the machine” on pages 4 - 11.
1
Turn off and unplug the machine from the
AC outlet and disconnect it from your
Macintosh
®
if you already connected an
interface cable.
2
Turn on your Macintosh
®
.
3
Insert the supplied CD-ROM for Macintosh
®
into your CD-ROM drive.
4
Double-click the Start Here OSX icon to
install the drivers and MFL-Pro Suite. If the
language screen appears, select your
language.
5
Click MFL-Pro Suite to install.
6
Follow the on-screen instructions, and
restart your Macintosh
®
.
7
After the DeviceSelector window appears,
connect the network interface cable to the
machine, and then connect it to a free port
on your hub.
For Mac OS
®
X 10.2.4 or greater
The DeviceSelector window will not appear if
you have also connected a USB interface
cable to the machine
before restarting your
Macintosh
®
or if you are overwriting a
previously installed version of the Brother
software. If you encounter this problem
continue with the installation skipping steps 9
to 12. You should select your Brother machine
from the Model pull-down list in the main
screen of ControlCenter2. (You can also see
the Software User’s Guide for details on
selecting which machine the ControlCenter2
will connect with.
Continued ...
In
s
ta
lling
t
he Dr
iv
er
s
&
S
o
ft
w
a
re
S
e
tt
ing U
p
th
e
m
a
ch
in
e
M
a
ci
nt
osh
®
Ne
tw
o
rk
Fo
r
Ne
two
rk
Us
e
rs