Brother DCP-585CW - Manual (Page 66)

Chapter 6
54
Printing Images
6
Note
Remove any memory cards or USB Flash
memory drive from the machine before
connecting a digital camera.
a
Make sure that your camera is turned
off. Connect your camera to the USB
direct interface (1) on the machine using
the USB cable.
1 USB direct interface
b
Turn on the camera.
c
Follow the steps in Print Images
on page 37.
CAUTION
To prevent damage to your machine, do not
connect any device other than a digital
camera or USB Flash memory drive to the
USB direct interface.
Understanding the
Error Messages
6
Once you are familiar with the types of errors
that can occur while you are printing from a
camera, you can easily identify and
troubleshoot any problems.
„ Out of Memory
This message will appear if you are
working with images that are too large for
the machine's memory.
„ Unusable Device
This message will appear if you connect a
camera that is not using the USB Mass
Storage standard. This message will also
appear if you connect a broken device to
the USB direct interface.
For more detailed solutions see Error and
Maintenance messages on page 73.
1