Brother MFC-L8600CDW - Manual (Page 164)

Chapter B
152
4 All Settings
You can reset all the machine’s settings
quickly back to the settings that were set
at the factory.
5 Factory Reset
This operation resets all the machine's
settings back to the defaults set at the
factory. Factory Reset takes more time
than All Settings.
Brother strongly recommends you
perform this operation when you dispose
of the machine.
NOTE
Unplug the interface cable before you
choose Network, All Settings or
Factory Reset.
How to reset the machine
B
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Initial Setup.
d
Press Initial Setup.
e
Swipe up or down, or press a or b to
display Reset.
f
Press Reset.
g
Swipe up or down, or press a or b to
display Machine Reset, Network,
Address Book & Fax, All
Settings or Factory Reset, and
then press the option you want.
h
Do one of the following;
 To reset the settings, press Yes and
go to step i.
 To exit without making changes,
press No and go to step j.
i
You will be asked to reset the machine.
Do one of the following;
 To reset the machine press Yes for 2
seconds. The machine will begin the
reset.
 To exit without resetting the
machine, press No. Go to step j.
NOTE
If you do not reboot your machine, the
reset will not finish and your settings will
remain unchanged.
j
Press .
NOTE
You can also reset the Network settings
by pressing , All Settings,
Network, Network Reset.