Before you choose the ring pattern to register – Brother MFC-L8600CDW User Manual

Page 68

Advertising
background image

Chapter 7

56

Before you choose the ring pattern to
register

7

You can only register one Distinctive Ring
pattern with the machine. Some ring patterns
cannot be registered. The ring patterns below
are supported by your Brother machine.
Register the one your telephone company
gives you.

NOTE

• Ring Pattern #1 is often called Short-Short

and is the most commonly used.

• If the ring pattern you received is not on

this chart, call your telephone company
and ask for one that is shown
.

The machine will only answer calls to its
registered number.

The first two rings are silent on the
machine. This is because the fax must
<<listen>> to the ring pattern (to compare
it to the pattern that was ‘registered’).
(Other telephones on the same line will
ring.)

If you program the machine correctly, it
will recognize the registered ring pattern of
the ‘fax number’ within 2 ring patterns and
then answer with a fax tone. When the
‘voice number’ is called, the machine will
not answer.

Registering the Distinctive Ring
pattern Very important!

7

After you set the Distinctive Ring feature to
On, your Distinctive Ring number will receive

faxes automatically. The receive mode is

automatically set to Manual and you cannot

change it to another receive mode while

Distinctive Ring is set to On. This ensures the

Brother machine will only answer the

Distinctive Ring number and not interfere

when your main telephone number is called.
When Distinctive Ring is on, the Touchscreen

displays D/R as the Receive Mode.

a

Press .

b

Press All Settings.

c

Swipe up or down, or press a or b to
display Fax.

d

Press Fax.

e

Swipe up or down, or press a or b to
display Miscellaneous.

f

Press Miscellaneous.

g

Press Distinctive.

h

Do one of the following:

If you have not registered the
Distinctive Ring, press
Distinctive, and then press On.

Go to step i.

If you have already registered the
Distinctive Ring, and want to change
the pattern, go to step i.

i

Press Ring Pattern.

j

Press the stored ring pattern you want.
Press OK.

(You will hear each pattern as you press
the four buttons. Make sure you choose
the pattern that the telephone company
gave you.)

k

Press .
Distinctive Ring is now set to On.

Ring
Pattern

Rings

1

short-short or
long-long

2

short-long-short

3

short-short-long

4

very long
(normal pattern)

Advertising
This manual is related to the following products: