Brother MFC-J875DW - Manual (Page 11)

Configuration methods
8
2
NOTE
Depending on your mobile device, you may not need to select a PIN code option. Follow the instructions
on your device.
j If your mobile device connects successfully, the machine displays the message Connected.
You have completed the Wi-Fi Direct™ network setup. For more information on printing from or scanning
to your mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint
Guide from the Brother Solutions Center (http://solutions.brother.com/).
If the connection fails, see Troubleshooting on page 10.
Configuration using the PIN Method of WPS
2
If your mobile device supports the PIN Method of WPS, follow these steps to configure a Wi-Fi Direct™
network.
NOTE
When the machine receives the Wi-Fi Direct™ request from your mobile device, the message
Wi-Fi Direct connection request received. will be displayed. Press OK to connect. If this
happens before you reach step j in the instructions that follow, go directly to step j and continue
configuration.
a
Press .
b
Press All Settings.
c
Press s or t to display Network.
Press Network.
d
Press Wi-Fi Direct.
e
Press s or t to display Group Owner.
f
Press Group Owner, and then press On.
g
Press PIN Code.
h When Wi-Fi Direct On? is displayed, press On to accept.
To cancel, press Off.
i
When Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed, activate
your mobile device’s WPS PIN configuration method (see your mobile device’s user’s guide for
instructions) and then press OK on your Brother machine. This will start the Wi-Fi Direct™ setup.
To cancel, press
.
j The machine will wait for a connection request from your mobile device. When PIN Code appears, type
the PIN displayed on your mobile device in to the machine.
Press OK.