Brother MW-140BT - Manual (Page 7)

1-6
In order for this printer to communicate using Bluetooth technol-
ogy with the computer running Windows
®
or the Pocket PC, var-
ious Bluetooth settings must be specified.
The following instructions show you the basic procedures for
make a Bluetooth communication. For details, refer to the
instruction manual for your Bluetooth device.
1
Set the MW-140BT the
Bluetooth switch to ON.
→
The status indicator light
will be blue.
2
Run the Bluetooth connection software on the
computer running Windows
®
or the Pocket PC.
3
The computer running Windows
®
or the Pocket
PC searches for Bluetooth devices and the printer
is detected.
→
“MW-140BTxxxx” is detected. “xxxx” is a last 4 digit of
its serial number.
4
Select this printer from the list of devices.
→
The screen to enter the “PIN code” (or “Pass key”) will
appear. Only the first time that the computer running
Windows
®
or the Pocket PC is connected to the printer
will this screen appear.
Communication using Bluetooth
technology
Bluetooth
communication ON