Brother PT-2100 - Manual (Page 27)

1
2
3
4
5
6
7
8
9
21
z
GETTING
STARTED
Turning Power On/Off
Press the key to turn the P-touch labeler on.
Press the key again to turn the P-touch labeler off.
z
Auto Power-Off Time
z
Turning Power On/Off
• Your P-touch labeler has a power saving function that automatically turns itself off if there is
no keys pressed within a certain time under certain operating conditions. Refer to the Auto
Power-Off Time table below for details.
• If the batteries are installed or the P-touch labeler is connected to an electrical outlet by the
AC adapter, the previous session’s information is maintained and will displayed when the
power is turned on.
P-touch labeler only Connected to PC
With AC adapter /
With battery
5 minutes 60 minutes