Brother MFC-9320CW User Manual
Start here, Mfc-9320cw quick setup guide, Unpack the machine and check the components
Advertising
Table of contents
Document Outline
- Quick Setup Guide MFC-9320CW
- Start Here
- 1 Unpack the machine and check the components
- 2 Remove the packing material from the machine
- 3 Install the drum unit and toner cartridge assemblies
- 4 Load paper in the paper tray
- 5 Connect the power cord and telephone line
- 6 Choose your language (if needed)
- 7 Choose the correct Receive Mode
- 8 Set the LCD contrast (if needed)
- 9 Set the date and time
- 10 Set your Station ID
- 11 Fax Transmission Report
- 12 Set tone or pulse dialing mode (Canada only)
- 13 Dial Prefix
- 14 Automatic Daylight Savings Time
- 15 Send in the Product Registration and Test Sheet (USA only)
- 16 Choose your connection type
- For USB Interface Users (Windows® 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista®/Windows® 7)
- For USB Interface Users (Mac OS X 10.3.9 or greater)
- For Wired Network Interface Users (Windows® 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista®/Windows® 7)
- For Wired Network Interface Users (Mac OS X 10.3.9 or greater)
- For Wireless Network Interface Users
- 17 Before you begin
- 18 Choose your wireless install method
- Configuration using the Installation CD-ROM and temporarily using a USB cable (Windows® only)
- Manual configuration from the control panel
- One push configuration using SecureEasySetup™, Wi-Fi Protected Setup or AOSS™
- Install the Drivers & Software (Windows® 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista®/Windows® 7)
- Install the Drivers & Software (Mac OS X 10.3.9 or greater)
- For Network Users
- Options and Consumables
- Start Here