Brother PT-9500PC - Manual (Page 17)

16
Preparations before creating labels
Before creating labels with the PT-9500PC, the following preparations are necessary.
Note
● The connection procedures are different depending on the operating system running on the
personal computer and whether a serial connection or USB connection is used. For details, refer
to “Installing the software” (
→ P.25).
Installing the software
Install the printer driver to use the PT-9500PC as a printer
with the personal computer and install the label design
software. For details, refer to “Installing the software” (
→
P.25).
Connecting the PT-9500PC
Connect the PT-9500PC to the power source and a
personal computer.
For details, refer to “Connecting the PT-9500PC” ( → P.17).
Creating labels
After preparing the PT-9500PC, start creating labels.
For details, refer to “Creating labels: Windows version” ( →
P.71) or “Creating labels: Macintosh version” ( → P.93).