Brother MFC-9010CN - Manual (Page 6)

6
4
Load paper in the paper
tray
a
Pull the paper tray completely out of the
machine.
b
While pressing the green paper-guide release
lever
a , slide the paper guides to fit the paper
size you are loading in the tray. Make sure that
the guides are firmly in the slots.
c
Fan the stack of paper well to avoid paper jams
and misfeeds.
d
Put paper in the tray, and make sure that the
paper is below the maximum paper mark
a .
The side to be printed on must be face down.
e
Put the paper tray firmly back in the machine.
Make sure that it is completely inserted into the
machine.
f
Unfold the support flap a to prevent paper
from sliding off the face-down output tray.
IMPORTANT
Make sure the paper guides touch the sides of
the paper so it will feed properly.
1