Brother DCP-375CW - Manual (Page 83)

Troubleshooting and Routine Maintenance
71
B
Cleaning the scanner glass
B
a
Lift the document cover (1). Clean the
scanner glass (2) and white plastic (3)
with a soft lint-free cloth moistened with
a non-flammable glass cleaner.
Note
In addition to cleaning the scanner glass
with a non-flammable glass cleaner, run
your finger tip over the scanner glass to
see if you can feel anything on it. If you
feel dirt or debris, clean the scanner glass
again concentrating on that area. You may
need to repeat the cleaning process three
or four times. To test, make a copy after
each cleaning cycle.
Cleaning the machine’s
printer platen
B
CAUTION
Be sure to unplug the machine from the AC
power outlet before cleaning the printer
platen to avoid electrical shock (1) to avoid
electrical shock.
a
Lift the scanner cover until it locks
securely in the open position.
b
Clean the machine’s printer platen (1)
and the area around it, wiping off any
scattered ink with a soft, dry, lint-free
cloth.
2
1
3
1