Other sources of information, Other sources of information -10 – Brother HL-4200CN User Manual
Page 20
UNIX PRINTING 1 - 10
If you have not created a spool directory for the Brother print server on your UNIX host computer, you
will need to do so now (the printer setup utilities in HP/UX, AIX, Solaris 2.xx, and other systems will
automatically create the spool directory). The lpd spool directory is usually located in the
/usr/spool
directory (check with your system manager to see if the location is different for your system). To create
a new spool directory, use the
mkdir
command. For example, to create a spool directory for the queue
laser1, you would enter:
mkdir /usr/spool/lpd/laser1
On some systems it is also necessary to start the daemon. This is done on Berkeley-compatible UNIX
systems with the
lpc start
command as shown in the following example:
lpc start laser1
Other Sources of Information
2
Refer to the Quick Setup Guide of the printer to learn how to configure the IP address on your
printer.