Brother HL 2270DW User Manual
Page 28
Wireless configuration using the Brother installer application (For HL-2135W, HL-2270DW and HL-2275DW)
24
4
(Windows Vista
®
)
1
Click the
button and then Control Panel.
2
Click Network and Internet and then the Network and Sharing Center and Sharing Center icon.
3
Click Connect to a network.
4
You can see the SSID of the wireless printer in the list. Choose SETUP and click Connect.
5
Click Connect Anyway and then Close.
6
Click View status of Wireless Network Connection (SETUP).
7
Click Details.... and confirm the Network Connection Details screen. It may take a few minutes
to change from 0.0.0.0 to 169.254.x.x IP address to be shown on screen (where x.x. are numbers
between 1 and 254).
(Windows
®
XP SP2)
1
Click Start and then Control Panel.
2
Click the Network and Internet Connections icon.
3
Click the Network Connections icon.
4
Choose and right-click Wireless Network Connection. Click
View Available Wireless Networks.
5
You can see the SSID of the wireless printer in the list. Choose SETUP and click Connect.
6
Check the Wireless Network Connection status. It may take a few minutes to change from
0.0.0.0 to 169.254.x.x IP address to be shown on screen (where x.x. are numbers between 1 and
254).
(Macintosh)
1
Click the AirPort status icon in the menu bar.
2
Select SETUP from the pop-up menu.
3
Your wireless network is connected successfully.
d
Follow the screen instructions to configure the wireless settings.
After you have completed the wireless setup, you can proceed to the printer driver installation.
Click Next in the installation dialog and follow the screen instructions.