Brother MFC-7440N - Manual (Page 19)

Configuring your machine for a network
11
2
Gateway (and router)
2
A gateway is a network point that acts as an entrance to another network and sends data transmitted via the
network to an exact destination. The router knows where to direct data that arrives at the gateway. If a
destination is located on an external network, the router transmits data to the external network. If your network
communicates with other networks, you may need to configure the Gateway IP address. If you do not know
the Gateway IP address then contact your Network Administrator.
Step by step chart
2
a
Configure the TCP/IP settings.
b
Change the print server settings.
„ Configure the IP address
„ Configure the subnet mask
„ Configure the gateway
i
i
i
See page 12
See page 12
See page 12
„ Using the BRAdmin Light utility
„ Using the BRAdmin Professional 3 utility
„ Using the control panel
„ Using the Web Based Management (web browser)
„ Using the Remote Setup (for MFC-7440N)
„ Using other methods
i
i
i
i
i
i
See page 15
See page 16
See page 16
See page 17
See page 17
See page 17