Brother MFC 9970CDW - Manual (Page 172)

Scanning
165
9
Scanning a document using the ICA driver (Mac OS X 10.6.x)
9
You can scan a document using one of the following methods:
 Using the Image Capture application
 Scanning directly from the “Print & Fax” section
Using Image Capture
9
In order to use Image Capture included with Mac OS X 10.6.x, the ICA Scanner Driver is required. The
Brother CUPS Printer Driver for Mac OS X 10.6.x contains the ICA Scanner Driver. To install the ICA Scanner
Driver, go to the downloads selection located on the main page for your model on the Brother Solutions
Center (http://solutions.brother.com/).
a Connect your Brother machine to the Macintosh using a USB cable. Or connect your Brother machine
to the same LAN (if you are using a network model) where the Macintosh is connected.
b
Launch the Image Capture application.
c
Select the machine from the list on the left side of the screen.
If you connected the Brother machine and your Macintosh with a USB cable, you will see the machine
in the DEVICES area. If connected via LAN, you will see it in the SHARED area.