Brother MFC-J4510DW - Manual (Page 24)

Chapter 3
18
Canceling a Broadcast in progress
3
a
Press .
b
Do one of the following:
 To cancel the entire broadcast, press
Entire Broadcast. Go to step c.
 To cancel the current job, press the
number being dialed on the
Touchscreen. Go to step d.
 To exit without canceling, press .
c
When the Touchscreen asks if you want
to cancel the entire broadcast, do one of
the following:
 Press Yes to confirm.
 To exit without canceling, press No.
d
Do one of the following:
 To cancel the current job, press Yes.
 To exit without canceling, press No.
Real Time Transmission
3
When you are sending a fax, the machine will
scan the document into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can do
this by turning on Real Time TX.
a
Load your document.
b
Do one of the following:
 When Fax Preview is set to off, press
Fax.
 When Fax Preview is set to on, press
Fax and Sending Faxes.
c
Press Options.
d
Swipe up or down, or press a or b to
display Real Time TX.
e
Press Real Time TX.
f
Press On (or Off).
g
Press OK.
h
Enter the fax number.
i
Press Fax Start.
NOTE
• If you are sending a color fax or if the
memory is full and you are sending a black
& white fax from the ADF, the machine will
send the document in real time (even if
Real Time TX is set to Off).
• In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.
Overseas Mode
3
If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on Overseas Mode. After you send a fax
using this feature, the feature will turn itself
off.
a
Load your document.
b
Do one of the following:
 When Fax Preview is set to off, press
Fax.
 When Fax Preview is set to on, press
Fax and Sending Faxes.
c
Press Options.
d
Swipe up or down, or press a or b to
display Overseas Mode.
e
Press Overseas Mode.
f
Press On (or Off).
g
Press OK.
h
Enter the fax number.