Control panel, Switching on, Switching off – AEG A81000TNX0 User Manual

Page 7

Advertising
background image

CONTROL PANEL

1

2

3

4

5

6

7

8

9

1

Green ON/OFF Indicator Light

2

ON/OFF Button

3

Temperature Regulator Button (for higher temperatures)

4

Display (shows the set temperature)

5

Temperature Regulator Button (for lower temperatures)

6

Red ALARM Indicator Light

7

ALARM STOP Button

8

Yellow SUPER function Indicator Light

9

SUPER Button

Switching on

• Allow the appliance to stand for 4 hrs after installation.
• Insert the plug into the wall socket.
• Press the ON/OFF Button (not necessary to press at the first switching on).
• The Green ON/OFF Indicator Light will light up continuously.
• The lighting up of the Green ON/OFF Indicator Light means that the appliance is switched

on.

• The blinking of the Red ALARM Indicator Light and the Acoustic Alarm means an improp-

er temperature in the freezer.

• To switch off the Acoustic Alarm and the Temperature Display flashing, press ALARM

STOP Acoustic Alarm OFF Button.

• When switching on the freezer for the first time, the Red ALARM Indicator Light will

blink until the internal temperature has reached a level required for the safe conserva-

tion of frozen food.

If the ALARM STOP button is not pressed then the acoustic alarm will break off after ap-

prox. one hour. The Red ALARM Indicator Light will continue to flash. Press the ALARM

STOP button.

Switching off

• Press the ON/OFF Button for appr. 3 seconds.
• The Green ON/OFF Indicator Light and the Display switches off.
• To disconnect the appliance from the power disconnect the mains plug from the wall

socket.

Control panel

7

Advertising