Brother MFC-5895CW - Manual (Page 72)

Chapter 6
56
Memory Receive
(Black & White only)
6
You can only use one Memory Receive
operation at a time:
 Fax Forwarding
 Paging
 Fax Storage
 PC Fax Receive
 Off
You can change your selection at any time. If
received faxes are still in the machine’s
memory when you change the Memory
Receive operations, a LCD question will
appear on the LCD. (See Changing Memory
Receive Operations on page 60.)
Fax Forwarding
6
When you choose Fax Forwarding, your
machine stores the received fax in the
memory. The machine will then dial the fax
number you have programmed and forward
the fax message.
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Setup Receive.
Press OK.
d
Press a or b to choose
Memory Receive.
Press OK.
e
Press a or b to choose Fax Forward.
Press OK.
f
Enter the forwarding number (up to 20
digits).
Press OK.
g
Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
Note
• If you choose Backup Print:On, the
machine will also print the fax at your
machine so you will have a copy. This is
the safety feature in case there is a power
failure before the fax is forwarded or a
problem at the receiving machine. This
Backup Print:On feature will not work
if Fax Preview is on.
• The machine can store faxes approximately
24 hours if there is a power failure.
• Color faxes will be stored in the machine's
memory only if you have chosen
B&W(Max.LGR) as your Receiving
Priority setting. (See Setting the Receiving
Priority on page 54.)
h
Press Stop/Exit.