Brother MFC-820CW - Manual (Page 29)

Installing the Driver & Software
27
Ma
c
int
os
h
®
US
B
Macintosh
®
For Mac OS
®
9.1 to 9.2
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on page 4 - 11.
1
Unplug the machine from the AC outletand
from your computer, if you already connected
an interface cable.
2
Turn on your Macintosh ® .
3
Put the supplied CD-ROM into your CD-ROM
drive.
4
Double-click the Start Here OS 9.1-9.2 icon to
install the printer and scanner drivers. If the
language screen appears, choose your
language.
5
Click MFL-Pro Suite to install.
6
Follow the on-screen instruction, and restart
your Macintosh
® .
7
Open the scanner cover to its open position.
8
Connect the USB cable to the USB socket
marked with a symbol. You will find the
USB socket above and to the left of the ink
cartridge slots, as shown below.
9
Carefully route the USB cable through the
trench and out the back of the machine as
shown below.
Then, connect it to your Macintosh
®
.
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
10
Lift the scanner cover to release the lock.
Gently push the scanner cover support down
and close the scanner cover.
11
Turn on the machine by plugging in the power
cord.