6 setup send, Before you begin, Using the adf (automatic document feeder) – Brother FAX-2800 User Manual

Page 66: Setup send -1, Before you begin -1, Using the adf (automatic document feeder) -1, Setup send

Advertising
background image

6 - 1

S E T U P S E N D

6

6

Setup Send

Before You Begin

Before you begin sending faxes, please be sure to read all the instructions and
cautions listed below for placing originals in the automatic document feeder.

Using the ADF (Automatic Document Feeder)

Documents must be
between 5.8 and 8.5 inches
wide and between 3.9 and
14.1 inches long. Your
machine can scan an image
only 8.15 inches wide,
regardless of how wide the
paper is.

The ADF (automatic document feeder) can hold up to 20 Pages, feeding each
one individually through the machine. Use standard (17 lb–24 lb) paper when
using the ADF. If you’re using heavier paper, feed each sheet individually to
prevent paper jams.

Fan the paper, then stagger
the pages in the document
feeder as shown below:

Make sure you insert documents face down, top edge first.

Adjust the paper guides to fit the width of your document.

Open the document tray by
pulling it toward you (1),
then unfold the extension
(2).

DO NOT use curled, wrinkled, folded or ripped paper, or paper with staples,
paper clips, paste or tape attached. DO NOT use cardboard, newspaper or fabric.

Approx. 1/2 inch

Advertising
This manual is related to the following products: