Brother MFC-J4710DW - Manual (Page 113)

Routine maintenance
99
A
IMPORTANT
DO NOT touch the print head. Touching
the print head may cause permanent
damage and may void the print head's
warranty.
NOTE
When a print head nozzle is clogged, the
printed sample looks like this.
Letter, A4 and Executive
Ledger, A3, Legal, A5, A6, envelopes,
Photo (4
 6 in.), Photo L (3.5  5 in.),
Photo 2L (5  7 in.) and Index Card
(5  8 in.)
After the print head nozzle is cleaned, the
horizontal lines are gone.
Checking the print alignment
A
You may need to adjust the print alignment
after transporting the machine if your printed
text becomes blurred or images become
faded.
a
Press .
NOTE
You can also press and Ink.
b
Press Test Print.
c
Press Alignment.
d
Press OK.
The machine starts printing the
Alignment Check Sheet.
e
For the “A” pattern, swipe up or down, or
press a or b to display the number of the
test print that has the least visible
vertical stripes (1-9), and then press it.
Press OK.
f
For the “B” pattern, swipe up or down, or
press a or b to display the number of the
test print that has the least visible
vertical stripes (1-9), and then press it.
Press OK.
g
For the “C” pattern, swipe up or down, or
press a or b to display the number of the
test print that has the least visible
vertical stripes (1-9), and then press it.
Press OK.