Brother MFC-J4710DW - Manual (Page 52)

Chapter 2
38
Paper settings
2
Paper Size and Type
(MFC-J4510DW)
2
Paper Type
2
To get the best print quality, set the machine
for the type of paper you are using.
a
Press .
b
Press (shows type of paper).
c
Swipe up or down, or press a or b to
display Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or Transparency,
and then press the option you want.
d
Press .
NOTE
The machine ejects paper with the printed
surfaces face up onto the paper tray at the
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
Paper Size
2
You can use the following sizes of paper for
copies: Letter, Legal, Ledger, A4, A5, A3,
Executive and 4"
 6" (10  15 cm) and two
sizes for printing faxes: Letter or A4. When
you change the size of paper you load in the
machine, you will need to change the paper
size setting at the same time so your machine
can fit an incoming fax on the page.
a
Press .
b
Press (shows size of paper).
c
Swipe up or down, or press a or b to
display Letter, A4, A5, EXE or 4"x6",
and then press the option you want.
d
Press .
NOTE
When you copy using Ledger, Legal or
A3 size paper, set the paper size option in
Copy mode.