Brother MFC-J4710DW - Manual (Page 95)

PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive
81
9
PhotoCapture Center™
print settings
9
You can change the print settings for the next
printing.
These settings are temporary, and the
machine returns to its default settings
1 minute after printing.
NOTE
You can save the print settings you use
most often by setting them as the default.
(See Advanced User’s Guide: Setting
your changes as the new default.)
How to scan to a
memory card or USB
Flash memory drive
9
You can scan black & white and color
documents into a memory card or USB Flash
memory drive. Black & white documents will
be stored in PDF (*.PDF) or TIFF (*.TIF) file
formats. Color documents may be stored in
PDF (*.PDF) or JPEG (*.JPG) file formats.
The factory setting is Color and 200 dpi
and the default format is PDF. The machine
automatically creates file names based on
the current date. (See Quick Setup Guide.)
For example, the fifth image scanned on July
1, 2012 would be named 07011205.PDF.
You can change the color and resolution.
For MFC-J4510DW
a
Load your document.
b
Open the media slot cover.
c
Put the memory card or USB Flash
memory drive in the correct slot.
d
Press Scan to Media.
IMPORTANT
DO NOT take out the memory card or
USB Flash memory drive while the
machine is reading or writing to it to avoid
damaging the card, USB Flash memory
drive, or the data stored on them.