Brother MFC-5860CN - Manual (Page 75)

Remote fax options
59
9
Retrieving fax messages
9
a
Dial your fax number from a telephone
or another fax machine using touch
tone.
b
When your machine answers, enter
your remote access code (3 digits
followed by l). If you hear one long
beep, you have messages.
c
When you hear two short beeps,
press 9, 6, 2.
d
Wait for the long beep, and then use the
dial pad to enter the number (up to 20
digits) of the remote fax machine where
you want your fax messages sent to,
followed by # #.
Note
You cannot use l and # as dial numbers.
However, press # if you want to create a
pause.
e
Press 9, 0 to reset the machine when
you have finished.
f
Hang up after you hear your machine
beep. Your machine will call the other
fax machine, which will then print your
fax messages.
Note
You can insert a pause in a fax number by
using the # key.
Changing your Fax
Forwarding number
9
You can change the default setting of your fax
forwarding number from another telephone or
fax machine using touch tone.
a
Dial your fax number from a telephone
or another fax machine using touch
tone.
b
When your machine answers, enter
your remote access code (3 digits
followed by l) at once. If you hear one
long beep, you have messages.
c
When you hear two short beeps,
press 9, 5, 4.
d
Wait for the long beep, and then use the
dial pad to enter the new number (up to
20 digits) of the remote fax machine
where you want your fax messages
forwarded followed by # #.
e
Press 9, 0 to reset the machine when
you have finished.
f
Hang up after you hear your machine
beep.
Note
You can insert a pause in a fax number by
using the # key.