Brother HL-4070CDW - Manual (Page 65)

Other Information
63
1
1
Shipment of the printer
Caution
• Once your printer has been set up and used, we do not recommend that it be moved or shipped unless
absolutely necessary.
• Color laser printers are complex printing devices. Moving the printer or shipping it without properly removing
the installed supplies can result in SEVERE damage to the printer. As a result, your printer may not operate
properly afterwards.
• If the printer must be shipped, see Repacking Instructions on this page, for step-by-step instructions on how to
properly prepare your printer for transport.
• Failure to properly prepare the printer for shipping according to the instructions on this page may VOID YOUR
WARRANTY.
• If for any reason you must move or ship your printer, carefully re-pack the printer in the original packing material
to avoid any damage during transport. The printer should also be adequately insured with the shipping
company you choose.
Repacking Instructions
Make sure that you have the following parts for
repacking:
1 Insertion sheet for repacking
2 Plastic bag for the waste toner box
3 Orange protective cover, Plastic bag that the toner
cartridge originally came in (4 pieces of each)
4 Orange packing material for locking the drum unit and
the belt unit (4 pieces)
5 A piece of paper (letter or A4) (Please prepare by
yourself.)
Repacking the printer
Warning
This printer is heavy and weights approximately
64.2 lb. (29.1 kg). To prevent injuries use at least
two people to lift the printer. Be careful not to pinch
your fingers when you put the printer down.
1
Turn off the power switch, and unplug all the
cables from the printer.
2
Press the front cover release button and then
open the front cover.
1
2
3
5
4