Brother DCP-8110DN - Manual (Page 26)

Chapter 2
16
Paper settings
2
Paper Type
2
Set up the machine for the type of paper you
are using. This will give you the best print
quality.
a
Do one of the following:
 To set the paper type for the
MP Tray
press Menu, 1, 1, 1, 1.
 To set the paper type for Tray#1
press Menu, 1, 1, 1, 2.
 To set the paper type for Tray#2
1
press Menu, 1, 1, 1, 3.
11.Paper Type
1.MP Tray
a Plain
b Thick
Select ab or OK
b
Press a or b to choose Thin, Plain,
Thick
, Thicker, Recycled Paper
or Label
2
.
Press OK.
c
Press Stop/Exit.
1
Tray#2
appears only if the optional lower tray is
installed on the DCP-8150DN or DCP-8155DN.
2
The Label type option appears only if you chose the
MP tray in step a.
Paper Size
2
You can use ten sizes of paper for copies:
Letter, A4, Legal, Executive, A5, A5 L, A6,
B5, B6 and Folio (8.5 in.
× 13 in.).
When you change the size of paper in the
tray, you will also need to change the Paper
Size setting so your machine can fit the
document on the page.
a
Do one of the following:
 To set the paper size for the
MP Tray
press Menu, 1, 1, 2, 1.
 To set the paper size for Tray#1
press Menu, 1, 1, 2, 2.
 To set the paper size for Tray#2
1
press Menu, 1, 1, 2, 3.
12.Paper Size
1.MP Tray
a Letter
b Legal
Select ab or OK
b
Press a or b to choose A4, Letter,
Legal
, Executive, A5, A5 L, A6, B5,
B6
, Folio or Any
2
.
Press OK.
c
Press Stop/Exit.
1
Tray#2
appears only if the optional lower tray is
installed on the DCP-8150DN or DCP-8155DN.
2 The Any option appears only when you choose the
MP tray.
Note
• If you choose Any for the MP Tray Paper
Size, you must choose MP Only for the
Tray Use setting. You cannot use the Any
Paper Size option for the MP tray when
making N in 1 copies. You must choose
one of the other available Paper Size
options for the MP tray.
• A5 L and A6 size are not available for
Tray#2
.