Brother MFC 7840W - Manual (Page 33)

Installing the Driver & Software
31
Macintosh
®
M
acint
osh
®
Wired
Network
5
For Wired Network Interface Users
For Mac OS
®
X 10.2.4 or greater
Important
Make sure that you have finished the
instructions from step 1 Setting Up the
Machine on pages 4 through 11.
1
Plug the AC power cord into an AC outlet. Turn
the power switch on.
2
Connect the network interface cable to the
machine, and then connect it to your network.
3
Turn on your Macintosh
®
.
4
Put the supplied CD-ROM into your CD-ROM
drive.
5
Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Note
Please see the Network User’s Guide on the CD-
ROM if you want to install the PS driver.
6
Choose Wired Network Connection
(Ethernet), and then click Next.
The installation will continue.
Note
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.