Brother PT-1650 - Manual

Model PT-1650
1. Parameter Settings
Set settings for bar code.
A. Protocol
Specify protocol.
 Code 39  UPC-A
 Code 128  EAN8
 EAN128  EAN13
 CODABAR  I-2/5
 UPC-E
B. Width
Specify width of bar code graphic.
 Small
 Medium
 Large
C. Under Number
Specify whether the number is printed
under the bar code.
 On
 Off
D. Check Digit
Code 39, I-2/5 and CODABAR only,
specify Check Digit on/off.
 On
 Off
1. Style
Set font style.
 Normal  Italic
 Bold  Italic + Bold
 Outline  Italic + Outline
1. Size
Set the size for an individual line.
 Auto  4mm
 1mm  6mm
 2mm  9mm
 3mm  12mm
1. Copies
 1-99
2. Number
(sequential labels)
 Off
 1-99
3. Block No.
Choose the block numbers (start/end)
to print.
4. Mirror
(print text in reverse order)
 Off
 On
C Co om mm mo on n F Fu un nc cttiio on ns s & & C Co om mm ma an nd ds s
1. Cut
 1 (1 = cut-pause; no chain print)
 2 (2 = no cut-pause; no chain print)
 3 (3 = cut-pause; chain print)
 4 (4 = no cut-pause; chain print)
2. Contrast
 + 2 to –2 ( 0 = default,
+
= darker,
— = lighter)
3. Auto Reduction
If label is set to AUTO size, text size
or width will change based on label
length.
 Text Size
 Text Width
4. Length Adjustment
Increase or decrease the label length
if the length differs from actual.
 +3 to -1, 0 = default
5. Symbol Save
Personal Category is full, symbols
will be added (on) or not (off).
 On
 Off
6. Units
Set unit for measurement.
 inch
 mm
7. Language
Set language for menus, settings
and messages.
 English
 Français
8. Version Info
Version information for P-touch
software & symbol set.
 Main
 Boot
 Char-Set (Character Set)
 Symb-Set (Symbol Set)
1. Length
Specify label length.
 Auto / 0.30 - 39.00inch
(Auto / 6 - 999mm)
2. Margin
Specify margin.
 0.10 - 4.00inch (2 - 99mm)
Setup
Menu
(Line)
Style
(Line)
Size
Format
(Label)
Length
Print
Options
Label
Type
Bar Code
Functions
(Label)
Frame
(Label)
Clear
Bar Code
1. Bar Code
Type in bar code data.
1. GLB (Global) Size
Set font size for label.
 Auto
 1mm
 2mm
 3mm
 4mm
 6mm
 9mm
 12mm
2. GLB (Global) Wide
Set label font width.
 Minimum
 Narrow
 Normal
 Wide
3. GLB (Global) Style
Set label font style - individual line
style overrides settings.
 Normal
 Bold
 Outline
 Italic
 Italic + Bold
 Italic + Outline
4. Align
Specify text alignment.
 Left
 Justify
 Right
 Center
1. Frame
Choose from 14 different borders.
 Off
 1 – 14
1. Clear
Clear text (and font) to start new label.
 Text & Format
 Text Only
1. Label Type
Specify type of label printed.
 Normal
 Rotate
 Rotate-Repeat
 Port
 Panel
 Flag
 Vertical
®
(Label/
Database)
Transfer
Search
Data
Insert
Space
Insert
Printed in China LN5676001A
1. Transfer
Transfer a database or template.
With PT-1650
 Turn Machine OFF with
 Press and Hold
simultaneously
 Release
 Release
With PC and PT-Editor
 Open PT-Editor on PC
 Open templates/database to be
transferred
 Verify printer is set to PT-1650 with
File ... Printer Setup command
 Access the File Transfer screen with
File ... Transfer Template
 For each template file to be
transferred
• Click on the template file [may
be attached to database] in list
• Choose a PF key to transfer to
by clicking on Change PF key
Mapping and selecting the PF
key from pull down list
 Click Start, to transfer files
On PC, select Exit to exit out of
transfer program.
On P-touch, press to turn
machine off. Press to turn
machine on.
Use PF key (you have assigned)
to access transferred template (to
directly access database, see
Data below).
1. Data
Scroll through a transferred database.
 - Scroll columns
 - Scroll rows
1. Search
Search through a transferred
database. Database must be opened
with .
 Type in characters (case
dependent). to start.
©2003 Brother International Corporation, 100 Somerset
Corporate Boulevard, Bridgewater, NJ 08807. All rights reserved.
All trademarks and registered trademarks referenced herein are
the property of their respective companies.