Brother HL-S7000DN User Manual
Page 5
Introduction
2
1
Configuration using Web Based Management (web browser)
1
Use the IPsec setting screen for Web Based Management to specify the IPsec connection conditions.
The IPsec connection conditions are comprised of three Template types: Address, Service, and IPsec, and
a maximum of 10 connection conditions can be configured.
a
Start your web browser.
b
Type “http://machine’s IP address/” into your browser (where “machine’s IP address” is the machine’s IP
address).
For example:
http://192.168.1.2/
c
No password is required by default. Enter a password if you have set one and press .
d
Click the Network tab.
e
Click Security.
f
Click IPsec.
g
You can configure the IPsec settings from the screen below.
Status
Select Enabled or Disabled for IPsec.
Negotiation Mode
Select the mode for IKE Phase 1.