Avid Technology PRO TOOLS MIX 51 - Manual (Page 13)

Chapter 6
LFE Send Plug-In
Overview
The LFE Send plug-in operates as
an RTAS plug-in in mono or multi-
mono for stereo tracks. Its purpose is
to allow you to send a track directly
to the LFE channel without having to
also mix the signal into the main
L/C/R/Ls/Rs outputs. Like the
Panner, the Mix 51 LFE Send plug-in
does not output any audio to the
normal Pro Tools mixer channel. By
using the “bypass” button the LFE
Send will also pass the signal
through to the Pro Tools mixer
channel.
LFE Send Controls
Output Selection
Select the destination bus for the
track by clicking on the Main Bus
popup menu. Select one of the Main
Buses (1, 2, or 3) as the destination
for the LFE signal.
Volume Fader
Use the volume fader to adjust the
trackʼs LFE level into the bus you
have chosen.
Mute/Solo Buttons
Use the Mute button to silence the
signal going to the output, and the
Solo button to listen to only this track
(and other Soloed tracks) going to
the Mix 51 Mixer.
Default/Fine-Tune
Opt-click (OS X) or alt-click (WinXP)
on the fader cap to reset the fader to
the default position. Hold down the
cmd key (OS X) or the control key
(WinXP) while dragging to perform
fine-tuned adjustments.