Brother DCP 9040CN - Manual (Page 124)

112
2
Push the drum unit in until it stops.
h
Close the front cover of the machine.
When you replace the drum unit with a new
one, you need to reset the drum unit counter
by completing the following steps:
i
Turn on the machine’s power switch.
j
Press Menu, 5, 5.
The LCD shows the part name of the
counter that needs to be reset.
Machine Info.
5.Reset Menu
k
Press a or b to choose Drum.
Press OK.
l
Press 1 to reset the drum unit counter.
m
Press Stop/Exit.
Replacing the belt unit
C
Order Number: BU-100CL
Change Belt Unit message
C
When the belt unit runs out, the following
message appears on the LCD. When you see
this message, you must replace the belt unit:
Change Belt Unit
CAUTION
DO NOT touch the surface of the belt unit.
If you touch it, it could degrade print quality.
Damage caused by improper handling of
the belt unit may void your warranty.