Brother HL-S7000DN - Manual (Page 94)

General Information
88
3
Printing storage data
3
Storage data
3
Storage Print allows you to save print jobs to the machine and print them later. The machine will not print the
document when you send it for printing. To print the document, you must use the control panel of the machine.
When the area to spool data is full, the LCD shows Storage Full. Press Cancel or Go to return to Ready
mode.
If you want to delete the spooled data, you can carry out this operation using the control panel.
Note
• For more information about the settings in the printer driver and how to store the print job in the machine,
see Storage Print tab uu page 39 (for Windows ® printer driver), Printing Preferences uu page 46 (for
Windows
®
BR-Script3 printer driver), Storage Print uu page 60 (for Macintosh printer driver) or Secure
Print uu page 68 (for Macintosh BR-Script3 printer driver).
• If the optional card reader is connected to the machine, you can use card authentication to print storage
data. Because you can use your cards to access only your personal storage data, card authentication is
effective at preventing unauthorized access to your storage data.
For details about the card reader and card authentication, please refer to the
Card Reader Operation Guide located on the Manuals page for your model on the Brother Solutions
Center web site at http://solutions.brother.com/.
How to print storage data
3
a
Press Storage.
Note
If you set card authentication to On, a list of the public print jobs will be displayed. Go to step c.
b Press a or b to choose Public or user name. Press OK.
c Press a or b to choose the job. Press OK.
d
(Only when you chose personal secured data)
Enter your password. Press OK.
e
Press a or b to choose Print or Print&Delete. Press OK.
Print&Delete is only displayed when you chose personal data. Data will be deleted after it is printed.
f (Only when you chose Print&Delete in step e)
Press a or b to choose Yes. Press OK.
g Enter the number of copies. Press OK.