Brother HL-4000CN - Manual (Page 65)

9-2
Using the Printer Control Panel to Allocate an IP
Address
Refer to the printer User's Guide "1.2 Configuring the Printer on a Network" about
how to configure IP address information using the printer control panel. By using the
control panel of the printer, you can program the IP address details at the same time
that other printer parameters are configured.
Changing the Default IP Address Using the
BRAdmin
Start the BRAdmin utility (from Windows 95/98/Me, NT4.0, Windows 2000/XP).
The BRAdmin application can use the IPX/SPX or TCP/IP protocols to communicate
with the print server. To change the default IP address, 0.0.0.0, use the IPX/SPX
protocol.