Brother PT-P700 - Manual (Page 47)

How to update P-touch Software
43
10
Updating the firmware / P-touch Editor Lite
10
a Turn the P-touch labeler on and connect the USB cable.
b
Double-click the [P-touch Update Software] icon.
NOTE
The following method can also be used to start the P-touch Update Software.
Double-click [Macintosh HD] - [Applications] - [P-touch Update Software] and then
[P-touch Update Software] application icon.
c
Click the [Machine update] icon.
 Do not turn off the power when transferring data or updating firmware.
 Before connecting the USB cable to the computer, check the Editor Lite lamp is not lit. If the Editor Lite lamp
is lit, press and hold down the Editor Lite button until the lamp goes off.
 If another application is running, please exit the application.