Brother MFC-9030 - Manual (Page 34)

Sending a Fax 25
B
ASIC F
AX USE
Manual and Automatic Fax Redial
If you’re sending a fax manually and the line is busy, press Redial/Pause and Fax Start to try
again. Anytime you want to make a second call to the last number dialled, press Redial/Pause and
Fax Start to save time.
If you’re sending a fax automatically and the line is busy, the machine will automatically redial up
to 4 times at 2 minute intervals.
Pause
Press Redial/Pause to insert a pause between digits to be dialled.
Sending Operation
Automatic Transmission
This is the easiest way to send a fax.
IMPORTANT: Do not pick up the external telephone’s handset.
1
Insert the document face down in the ADF.
2
Enter the fax number using One Touch (FAX-8070P), Speed Dial, Search or the dial pad.
3
Press Fax Start.
Manual Transmission (With an External Telephone)
Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending a fax.
1
Insert the document face down in the ADF.
2
Pick up the handset of the external telephone and listen for a dial tone.
3
Enter the fax number you want to call. (You can dial the number by using One Touch, Speed
Dial, Search or dial pad.) (See Dialling a Number, page 23.)
4
When you hear the fax tone, press Fax Start.
5
Return the handset of the external telephone to its cradle.
If the machine is connected to a PABX, you may need to insert an additional
number prefix (e.g. “9”) and a “pause” before each fax or telephone number to gain
access to the outside line. When you press Redial/Pause, a dash “-” will appear
on the display. By storing a pause, you can create a delay of 3.5 seconds.