American Standard 1340.855 User Manual
Metering faucets, Codes and standards, 5" gooseneck spout widespread general description
L23
© 2008 AS America Inc.
METERING FAUCETS
5" GOOSENECK SPOUT WIDESPREAD
GENERAL DESCRIPTION:
Metering widespread with
rigid
gooseneck faucet.
Vandal-resistant solid brass construction. Easy-push
handles. Water conserving pressure compensating 1.5
GPM vandal-resistant aerator. Factory set for a maximum
of 0.25 gallon flow per activation. Replaceable cartridge.
Adjustable flow cycle.
MODEL NUMBER:
1340.855 5" Rigid gooseneck spout,
1.5 GPM pressure compensating,
vandal-resistant aerator
Meets the American Disabilities Act Guidelines
and
ANSI A117.1 Requirements for the
physically challenged.
FOR GROUND JOINT
OR 1-1/2" O.D. SLIP
CONNECTION
54mm
(2-1/8)
30mm
(1-1/16 D.)
51mm
(2)
38mm
(1-1/2)
38mm
(1-1/2)
90mm
(3-1/2)
273mm
(10-3/4)
172mm
(6-11/16)
127mm
(5)
MOUNTING
SURFACE
203mm
(8)
FLOW RATE*
VOLUME PER CYCLE (GAL)
P R E S S U R E ( P S I )
0.00
20
40
80
60
0.05
0.10
0.15
0.20
0.25
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9
PRODUCT FEATURES:
• Pressure Compensating Aerator:
Provides a constant
water flow of 1.5 gpm throughout the pressure range
.
• Vandal-Resistant Brass Construction and Aerator:
Durable - Excellent in high use applications.
• Automatic Shut-off:
Stops water and energy waste. Ideal for
public restrooms where uncontrolled water usage is costly.
• Meets ADA Standard:
Requires less than 5 lbs. of operating
force to initiate flow per ANSI A117.1.
• Adjustable Flow Cycle
• Replaceable Valve Cartridge:
Facilitates simple replacement.
• Hot/Cold Button Indicators
SUGGESTED SPECIFICATION
Metering faucet shall feature a vandal-resistant brass construction with a replaceable valve cartridge and an adjustable flow
cycle. Shall also feature a water-conserving, pressure compensating 1.5 gpm/5.7L/min vandal-resistant aerator. Factory set
to maintain flow below the maximum 0.25 gallons per cycle required by ANSI A112.18.1M. Push button activator shall meet
ANSI A117.1 Standard. Fitting shall be American Standard Model # 1340.855.002.
46mm
(1-3/4)