AEG LAVAMAT W 857 - Manual (Page 17)

Operating Instructions
17
Running a washing cycle
Brief instructions
A washing cycle consists of the following steps:
0 1. Open the door and load the washing.
2. Close the door.
3. Add detergent/conditioner.
4. Set the appropriate washing programme:
– Set the programme and temperature using the programme selector
– Set programme options as required.
5. Change the Spin Speed /select
o (RINSE HOLD) as necessary.
6. Start the washing programme by pressing the O/s (START/PAUSE)
button.
After the washing programme has ended:
Important! If the washing cycle has ended with a Rinse Hold, select
v (DRAIN) or K (SPIN) before opening the door.
7. Open the door and remove the washing.
The door can be opened after the K (DOOR) light goes off and the
L (END) light has come on.
8. To switch off the washing machine: turn the programme selector to
I (OFF).