Alpine PXA-H700 - Manual (Page 27)

25
-EN
FR
ES
DE
SE
IT
Achieving powerful high volume sound
With Dolby Digital, the dynamic range is
compressed so that powerful sound can be
achieved at regular volume levels. This
compression can be canceled to achieve an
energetic sound with even greater power, like the
sound in a movie theater.
NOTE
This function works only in the Dolby Digital mode.
1
Press the SETUP button.
The setup mode is set.
2
Turn the Rotary encoder to select the “5.1CH
SETUP” mode, then press the ENTER button.
3
Turn the Rotary encoder to select “LISTENING
MODE”, then press the ENTER button.
4
Turn the Rotary encoder to select “STANDARD”
or “MAXIMUM”, then press the ENTER button.
STANDARD:
For powerful sound at regular volume levels
MAXIMUM:
For powerful sound at high volumes
5
Press the SETUP button repeatedly to quit the
setup mode.
NOTES
• Keep the volume to a level at which sounds outside
the vehicle can still be heard.
• This function may have no effect, depending on the
type of software (DVD, etc.).
• Once the settings are made, we recommend storing
them in the memory. See page 28 for instructions.
STANDARD MAXIMUM
Adjusting the DVD level
The volume (signal level) for the Dolby Digital,
Pro Logic
II , DTS and PCM modes can be set.
NOTE
Avoid stopping, pausing, switching the disc, cueing,
fast-forwarding or switching the audio channel of the
player while making this adjustment. The setting is
canceled if the decode mode is switched.
1
Press the SETUP button.
The setup mode is set.
2
Turn the Rotary encoder to select the “5.1CH
SETUP” mode, then press the ENTER button.
3
Turn the Rotary encoder to select the “DVD
LEVEL”, then press the ENTER button.
4
Press the ENTER button to select the mode to
be adjusted.
5
Turn the Rotary encoder to adjust the level.
The level can be adjusted in the range of –5 to
+5.
6
Repeat steps 4 and 5 to set the levels for the
various modes.
Once the settings are completed, press the
SETUP button repeatedly to quit the setup
mode.
NOTE
After making the settings, we recommend storing them
in the memory. For instructions, see page 28.
DOLBY D DOLBY PL II DTS PCM
(DOLBY DIGITAL)