Brother PT-2470 - Manual (Page 57)

47
App
e
nd
ix
BUFFER EMPTY!
• This message appears if no
text has been typed in when
you try to print or Preview
function.
• Type in some text before
trying to perform any of
these operations.
BUFFER FULL!
• This message appears if you
try to add a character, a
space, a new line, a new
block, a symbol, an accented
character or a bar code after
the maximum number of
characters has already been
entered.
• Delete some existing text
before trying to add any
more.
TAPE CASSETTE
CHANGED!
• This message appears if the
tape cassette was changed
while the P-touch paused for
the tape to be cut.
• Change the tape cassette
back again.
CHECK
BATTERIES!
• This message appears if a
combination of new and
used batteries, a combination
of batteries of different types
(alkaline and Ni-MH),
manufacturers or models
have been installed.
• Replace the batteries with
six new AA batteries of the
same type.
CHECK SETTING IN
LABEL TYPE MODE!
• This message appears if you
try to change the settings for
the Length function or
Frame function after a Label
Type mode with a preset
label length or frame has
already been selected.
• Select a different Label
Type mode.
CUTTER ERROR!
• This message appears if the
tape cutter button was
pressed when
p
was
pressed or the tape was
being fed.
• Release the tape cutter
button. If
p
was pressed,
press
f
to feed out any
printed tape.
• If the problem cannot be
corrected, contact your
service representative.
EXCEEDS PRINT
COPY LIMIT!
• This message appears if
more than 1000 copies were
selected with the Print
Option functions.
• Note the number of copies
plus the number of
sequential labels cannot
exceed 1000.
• Select less than 1000 copies.
Error Message Cause Solution
PT2470_chap5.fm Page 47 Thursday, August 26, 2010 4:56 PM