Brother MFC-425CN - Manual (Page 29)

FRONT PANEL SETUP 3 - 9
NC9100h_FM6.0
Node Name
You can register the machine name on the Network. This name is
often referred to as a NetBIOS name; it will be the name that is
registered by the WINS server on your network. Brother
recommends the name BRN_XXXXXX (where XXXXXX is the last
six digits of the Ethernet address) (up to 15 characters).
(For MFC-425CN)
1 Press Menu/Set , 5 , 1 , 5 .
2 Select 1 to change. Enter the Node Name.
3 Press Menu/Set .
4 Press Stop/Exit .
(For DCP-315CN)
1 Press Menu .
2 Press ▲ or ▼ to select 3.LAN .
Press Set .
3 Press ▲ or ▼ to select 1.Setup TCP/IP .
Press Set .
4 Press ▲ or ▼ to select 5.Node Name .
Press Set .
5 The Node Name will be displayed.
6 Press Stop/Exit .
DCP-315CN cannot change the Node Name from the control
panel menu, however the BRAdmin Professional utility
enables you to change the IP Address. (See Changing the IP
Address using the BRAdmin Professional utility on page 2-2.)