Alloy Computer Products Network Device NuDOG-MPT - Manual (Page 9)

6
E-Mail: [email protected]
Http://www. X tramus.com
XTRAMUS TECHNOLOGIES
®
Loads settings of the model corresponding to DUT.
Reloads the same model if the parameters have been modified.
Connects to NuDOG.
Starts testing.
Stops testing.
Exits the program.
First, click button to open an .ini file. Click button to run the
test.
3.2.3 Model Name
Go to Setting menu and click New Model to bring out the window below.
Input a name to create a new model, than click OK button to exit.
3.2.4 Configurations of Task
Showing information of current parameters for Frame test including server address,
frame length, frame count, frame gap, and for Ping test including direction, source IP
and destination IP.