Accusplit Eagle 970-069 User Manual

627 i, Accusplit® eagle, Multi-function pedometer operating instructions

Advertising
background image

SETTING UP YOUR PEDOMETER
To record your distance and calories accurately, you will need

to set your stride length and body weight.

CHOOSING A MEASUREMENT SYSTEM
This unit is initially set to use English measurement units

(Miles and Pounds). To change the unit back and forth

between English and Metric units (Kilometers and Kilograms),

press the green RESET button for 5 seconds.

Finding Your Stride Length: Your stride length is the length of

one of your steps, measured from “toe to toe.” To measure,

walk 10 steps with your normal stride and measure the TOTAL

DISTANCE from the toe of your starting step to the toe of your

10

th

step (see diagram below). Divide the TOTAL DISTANCE by

10. This is your stride length. Example: If you walk 22 feet, your

stride length is 2.2 feet.

Setting Your Stride Length: Press the yellow MODE button

until arrow on bottom of display points to “DIST.” Press the

dark blue SET button once to enter setting mode. Display will

shift to show stride (for example, “F 1.95” means stride is set

to 1.95 feet). Press the dark blue SET button(+) to increase

stride length. Press the green RESET button(–) to reduce stride

length. Press the yellow MODE button to exit setting mode.

Setting Your Weight: Press the yellow MODE button until arrow

on bottom of display points to “CAL.” Press the dark blue SET

button once to enter setting mode. Display will shift to show

weight in pounds. For example, “L 165” means weight is set to

165 lbs. Press the dark blue SET button(+) to increase weight

setting. Press the green RESET button(–) to reduce weight

setting. Press the yellow MODE button to exit setting mode.

Setting the Clock: Press the yellow MODE button until the

arrow on the bottom of the display points to the clock icon .

Press the dark blue SET button to enter clock setting mode

(clock readout will flash). Press the green RESET button to

advance Hours. Press the dark blue SET button to advance

Minutes. Press the aqua CLOCK button to shift between

12 and 24 hour mode. (“H” will show in display for 24 hour

mode.) Press the yellow MODE button to exit clock setting

mode, or wait a few seconds for pedometer to automatically

exit clock setting mode.

WEARING YOUR PEDOMETER
While gently holding the belt clip open, slide the pedometer

onto your belt or the top edge of your pants or skirt. It should

fit snugly and level, above one knee.

Note: The pedometer should be as vertical as possible.

Walkers with larger stomachs may find it helpful to wear the

pedometer farther back on the body, toward one hip.

The cover must be closed for the pedometer to work. To avoid

losing or dropping your pedometer, use the included leash

and clip to fasten the pedometer securely to your clothing.

ACCUSPLIT, Inc. • 6120 Stoneridge Mall Rd., Suite 210 • Pleasanton, CA 94588 USA

800-965-2008 • 925-226-0888 • FAX 925-463-0147 • www.ACCUSPLIT.com • [email protected]

10 steps

Congratulations on taking the first step to wellness

with your purchase of an ACCUSPLIT pedometer.

It’s easy to set up your new pedometer.

Just follow the steps below, and start walking!

MULTI-FUNCTION PEDOMETER

OPERATING INSTRUCTIONS

ACCUSPLIT®
EAGLE

1690

970-069

Eat Right! Walk More! Live Well!

The ACCUSPLIT Lifestyle

ACCUSPLIT

EAGLE

S

E

T

TW15MG

STEP DIST CAL

1690

SCAN

MODE

627 I

R

E

S

E

T

MY

CALORIE

+

Dark Blue:

SET

Green:

RESET

Yellow:

MODE

Cream:

SCAN

(toggle on/off)

Aqua:

CLOCK

(momentary)

Current mode

arrow indicator

DISPLAY MODES
Press the yellow MODE button to cycle through:
• STEP: STEP mode shows your step count since last

reset, up to 200,000 steps.
• DIST: DISTANCE mode shows distance walked or

jogged since last reset, in miles or kilometers.
• CAL: CALORIE mode shows calories burned

through step activity since last reset.

: ACTIVITY TIMER MODE shows total activity

time in minutes and seconds then hours and

minutes since last reset. The timer runs automati-

cally whenever steps are being recorded.

: CLOCK mode shows time of day.

• SCAN mode: Loops through each display mode,

briefly showing step count, then distance, then

calories.

Advertising
This manual is related to the following products: