English bahasa indonesia, Quick start, Start cepat – Acer P5307WB User Manual

Page 2: Installation, Interface connector, Instalasi, Penghubung antarmuka

Advertising
background image

Quick Start

INSTALLATION

1. Power cord
2. VGA cable
3. VGA to component video/HDTV

adapter

4. Composite video cable
5. Audio cable
6. S-Video cable
7. RS232 cable
8. HDMI cable
9. 3 RCA component cable
10. RJ45 cable
11. USB cable
12. 12V DC cable
13. USB storage device/USB Wifi adapter

(Optional)

14. Microphone

Note: Connector interface is subject to model's specifications

INTERFACE CONNECTOR

1. Ensure the projector and your

computer are turned off.

2. Connect one end of the VGA cable to

the "VGA IN 1" or "VGA IN 2"
connector on the projector; connect
the other end to the VGA connector
on the computer and tighten the
screws.

3. Connect one end of the power cord

into the AC power socket on the
projector; connect the other end to an
electrical outlet.

1. Remove the lens cap.
2. Turn on the projector first and then

the computer.

3. Adjust the position, focus and zoom.
4. Run your presentation.

1. Press the power button twice.
2. Do not remove AC power cord from

outlet until the projector fans shut
down.

Start Cepat

INSTALASI

1. Kabel daya
2. Kabel VGA
3. VGA ke video komponen/adaptor

HDTV

4. Kabel video gabungan
5. Kabel audio
6. Kabel S-Video
7. Kabel RS232
8. Kabel HDMI
9. 3 Kabel komponen RCA
10. Kabel RJ45
11. Kabel USB
12. Kabel DC 12V
13. Perangkat penyimpanan USB/

Adaptor Wifi USB (Opsional)

14. Mikrofon

Catatan: Antarmuka penghubung untuk spesifikasi model

PENGHUBUNG ANTARMUKA

1. Pastikan proyektor dan komputer

Anda mati.

2. Sambungkan salah satu ujung kabel

VGA ke konektor "VGA IN 1" atau
"VGA IN 2" di proyektor;
hubungkan ujung kabel yang lain ke
penghubung VGA pada komputer
dan kencangkan sekrup.

3. Hubungkan salah satu ujung kabel

daya ke dalam soket daya AC pada
proyektor; hubungkan ujung kabel
yang lain ke outlet elektrik.

1. Lepaskan tutup lensa.
2. Hidupkan proyektor dahulu,

kemudian komputer.

3. Sesuaikan posisi, fokus dan zum.
4. Jalankan presentasi Anda.

1. Tekan tombol daya (power) dua kali.

2. Jangan pindahkan kabel daya AC

dari stop kontak hingga kipas

proyektor mati.

1

2

Connecting to a Computer

Powering On the Projector

Powering Off the Projector

1

2

Menghubungkan ke Komputer

Pemberian Daya pada Proyektor

Memutus Daya pada Proyektor

English

Bahasa Indonesia

P5307WB_P5207Bqs.fm Page 4 Wednesday, March 13, 2013 11:33 AM

Advertising
This manual is related to the following products: