Appendix, Leds, Dip switch setting – ATEN CS-102 User Manual
Page 9
Appendix
LEDs
The CS-102/CS-122 contains one Power LED, two Ready LEDs, and two Port Select LEDs on its front panel. Their
indications are as follows:
Power LED:
Lights when the CPU Switch is running.
Ready LED:
Lights when the connected PC or CPU Switch is running.
Port Select LED:
Lights to indicate the currently selected port.
Depending on conditions, the Port Select LED turns on and off according to the following pattern:
Condition
Pattern
1
Port Not Selected
Off
2
Port Connects to a CPU Switch
Flashes Long Off; Short On
3
Port Connects to a Computer
Steady On
4
Port Connects to a Computer Under Previous/Next Mode
Flashes Long On; Short Off
5
Port Connects to a Computer Under Scan Mode
Flashes On and Off Equally
DIP Switch Setting
Scan Time is determined by the DIP Switch of the First Stage* CPU Switch. For the second and the third-stage CS-102/122
units, all DIP switches are set to Off.
DIP Switch Number
Scan Time
1
2
3
4
ON
ON
X
ON
3 Sec.
OFF
ON
X
ON
10 Sec.
ON
OFF
X
ON
20 Sec.
OFF
OFF
X
ON
40 Sec.
* The CPU Switch that the keyboard, monitor, and mouse connect to is the First Stage unit.