Accton Technology EN2216-1 - Manual (Page 4)

4
b. Connecting to the BNC port with thin coax cable.
Figure 3. Connecting to Thin Ethernet Cable
(EtherDuo-PCMCIA, model EN2216-2)
Note: If the card is attached to the end of the network segment,
be sure a 50-Ohm terminator is installed on the open end of the
T-type connector.
Software Driver Installation
The diskette labled “Driver Diskette,” that comes with the
package contains all the software drivers available for the
Ethernet PC Card. A RELEASE.TXT file, describing the
contents of the diskette is found in the root directory. Different
drivers are stored in separate subdirectories, which also
include a text file. Select the driver you need for your system
and refer to the text file for the installation procedure.