Ke-6 – Ultra Start KE-6 User Manual

Page 5

Advertising
background image

1 Press and release the Lock button on the remote transmitter.
2 The park lights will flash and the horn will chirp one time.
3 The doors will lock and the Starter Disable** will activate. (optional)
4 The LED will start flashing within five seconds.

NOTES:
- If system is in valet mode the horn will not chirp and park lights will not flash but
doors will unlock. The LED will be one SOLID.

LOCK DOORS

PRESS & RELEASE

SYSTEM PROGRAMMING - Menu 1

PAGE 4

KE-6

OWNER'S MANUAL

TRANSMITTER FUNCTIONS

DRIVER'S DOOR PRIORITY UNLOCK

1 Press then release the Unlock button on the remote transmitter.
2 The park lights will flash and the horn will chirp two times.*
3 The driver's doors will unlock and the Starter Disable will deactivate. (optional)
4 The LED will stop flashing.
5 Press the Unlock Button a second time within 3 seconds and the other doors
will unlock.

* Optional Feature may require additional parts

UNLOCK DOORS

1 Press then release the Unlock button on the remote.
2 The park lights will flash and the horn will chirp two times.
3 The doors will unlock and the Starter Disable** will deactivate.
4 The LED will stop flashing.
5. The interior lights will turn on for 30 seconds or until the key is turned on or if
the doors are locked by the remote.**

NOTES:
- If the panic mode was active (horn sounding), the first press of the unlock

button will turn off the horn and the second press will unlock the doors.

- If system is in valet mode the horn will not chirp and park lights will not flash

but doors will unlock. The LED will be one SOLID.

See Valet / Service Mode section of manual for further information.

** Optional Feature may require additional parts

PRESS & RELEASE

PRESS TWICE

PAGE 5

KE-6

OWNER'S MANUAL

TRANSMITTER FUNCTIONS

ACTIVATE TRUNK RELEASE

1 Press then HOLD the Unlock button on the remote.
2 The park lights will flash and the horn will chirp two times.
3 The doors will unlock and the Starter Disable will deactivate. (optional)
4 The LED will stop flashing.
5 - Continue to HOLD until the horn chirps again and trunk activates
6 - Release Button

NOTES:
- For safety, the trunk release will not active when ignition key is ON.

* Optional Feature may require additional parts

PRESS & HOLD

Advertising