AMD ATI RADEON HD 2400 - Manual (Page 45)

39
6 Align your ATI Radeon™ HD 2400 Series graphics card in the
secondary PCIe™ slot next to the existing ATI Radeon™ HD 2400
Series graphics card and press firmly until the card is fully seated.
7 Install the CrossFire™ bridge interconnects.
Caution! Always handle the CrossFire™ bridge interconnects by the
connector only. Do not push or pull on the flexible cable.
Proper handling of the CrossFire™ bridge interconnects
a) Remove protection tags from the connectors at each end of the
CrossFire™ bridge interconnects.
b) Press one end of the CrossFire™ bridge interconnect onto one of
the connections on one of the graphics cards.
c) Press the opposite end of the CrossFire™ bridge interconnect
onto corresponding connection of the second graphics card.
d) Repeat steps b and c above to connect the second CrossFire™
bridge interconnect to the graphics cards.